Rebuild options
Posted: Tue Feb 26, 2019 8:44 pm
Evening guys. Excuse the new forum name. I can’t get into the old one!
A compression test on my NC35 shows one of the cylinders is way down. I suspect the rings/bore as a wet test showed a jump in pressure temporarily.
So having searched these forums it seems there are options for a top end rebuild. What pistons do you recommend/what is available? I’ve seen people love the Cosworth units from Mike Norman, but it looks like the only ones he has left require the HRC replica rods too. Unfortunately I just don’t have that kind of money.
So whatbare the options?
Cheers
A compression test on my NC35 shows one of the cylinders is way down. I suspect the rings/bore as a wet test showed a jump in pressure temporarily.
So having searched these forums it seems there are options for a top end rebuild. What pistons do you recommend/what is available? I’ve seen people love the Cosworth units from Mike Norman, but it looks like the only ones he has left require the HRC replica rods too. Unfortunately I just don’t have that kind of money.
So whatbare the options?
Cheers