Hi, first post. I have a 1988 3 EN1, which I bought for $200 but now owes me 4.5k . It is finished excepting some paint. I’m struggling to find even Chinese fairings to suit. I really only need left and right front side panels/underbelly. I can buy chinese 3EN2 fairings. I understand the air hose inlet positioning is different on the nose cone, but otherwise are the fairings the same?

Wotcha
The 3en2 fairing lowers and the fzr600 3he ( the one piece lowers) both fit - which is nice. If you buy oe yam fairings check they still have the section low + rear that joins together under the shock / swingarm. Its fragile and gets broken

Thanks Evil. My bike came without the side front lowers. I have Chinese ones with stock graphics but they are white and don’t match the stock white pearl. I want the bike to look stock so might buy another whole EN2 kit raw just to get the lowers . There seem to be very few EN FZR400s in Aus and OEM bits are impossible to find.

Theyre getting to the age where theyre beyond repair. The fairings get brittle bits get lost - like the seat joiner and the inner fairings