Hi Guys

Time for me to get rid of loads of ex-racing spares as I am running out of garage space and have other projects to get on with. I have a lot of little bits too - just lemme know what you are after and I will have a look to see if I have it.

Other than that, I have some bigger parts too:
Frames
Forks
Shock (inc R6 shock which I never fitted)
Tank
Some plastics

And some REALLY nice stuff:
Front Pirelli WET race tyre on a wheel. It has has light use (I didnt use it but bought it a couple of months ago from a guy who had - I reckon it has been used once on a wet session).
Brand new Pirelli GPR70SP rear tyre on a wheel

My number is 07968 639960 and my email is dalemountford@hotmail.com. Drop me a line if you want any of the above.

Cheers
D

What 3EN2 parts do you have?

I'm looking for:

- Rear subframe (Doenst have to be in good cond. just straight)
- Pillion pegs
- Mirrors (Original small square black ones)
- Front fairing stay and mirror stay (Doenst have to be in good cond. just straight)
- And any fairing parts

do you have a set of side panels for the 3en1 or a race fairing? not bothered if they are in a state!
cheers
taggy

(cant email from work but will later on!)

How much for the forks mate? 3en1?

Hi Guys, I will try to answer it all in one go:

FAIRING
I have a race fairing (thought it was 3EN1, but its actually 3EN2 but fitted to a 3EN1 bike so I presume no differences in fitting). Its a bit tatty and a small section on the top of the screen is broken and gaffered together - should be a pretty simple job for someone with fibreglass - I havent fixed it yet cos I just bought the bike and thought I would try it on track before I did any real work on it. I have a few race fairings (I have a R1 and a R6 fairing fitted to my 2 other FZRs) and this is by FAR a much more sturdy, well built fairing than the others. I think, along with the screen, I would be after about £80 for it, but please dont expect a brand new one for that cash.

FORKS
Please check what diameter your forks are (or what diameter your triple clamp is). I have forks from a 3EN1 and a Genesis. They are both 38mm. But the 3EN2 is 41mm which I dont have any spares of. However, the 3EN1 forks I have are hard - I asked the guy I bought them off and he said he just put bigger preload spacers inside them, but I reckon they have very heavy oil in them too - I am going to try them out at Oulton Park this weekend to decide whether I keep them or use my Genesis ones instead. I also have a set of callipers on the forks with braided hoses. Please email me if you are interested and we can chat - not really sure how much for them - please make me an offer for the ones you want.

BITS FOR MARB
I do have the pillion pegs and complete whole hangers for the 3EN2. You can have them for a tenner including postage and packaging. Sorry, but I dont have any decent mirror parts (I have some stuff but I dont think it is original). I dont have a 3EN2 subframe available (sorry, but I need the one I have - it is customised to fit my Ducati 916 seat unit!!). I have a 3EN1 seat unit which *seems* to fit but I cannot be sure. Also the 3EN1 seat unit has been cut short for racing so couldnt handle a pillion. Other than that I have a Genesis subframe in fine nick, but I know you cannot fit a Genesis subframe to a 3ENx frame (I also have a Genesis frame if you are interested).

Please let me know if anyone else wants anything else - I have so many boxes of stuff. I will check based on what you ask.

BTW, I live near Liverpool so I am happy for you to skip P+P costs if you collect.

Another BTW, I am going to Oulton Park on Saturday for a track day - if you want to meet up with me to pick up any parts, just lemme know what you want and I will bring it along.

Cheers
D

Do you have a 3EN2 swingarm for sale and can you tell me the width between the inside walls by placing a metal ruler through the chain adjuster slots. My and Marb's is 22.7 and 22.8, I need one that's 23cm. My mate has 2 like that. Not sure if me and Marb just have battered ones, but I do know I need one that's 23cm and they exist?