What have people done in the link with the bush in the rocker where it attaches to bottom of fork when taking my old one out it was seized pretty hard
Puttin* in the bmw shock with 800 lb spring re valve to suit

Could you use the P/N from the OEM part list diagram in your description of the problem. It would clarify exactly which parts to which you refer.

Rick O does a hrc linkage that works really well with the BMW shock.

What about the 35 link

I've got a re sprung BMW shock. It's a real tight fit and have shaved a few mil off the inside of the swingarm. Rocker arm as standard what is different about the RO one.?


Sent from my iPhone using Tapatalk