NC23 unfinished project 95% done

Forum rules
All Bikes advertised for sale must include the following
Price
Location
Contact details.
Any adverts without any of the above will be removed without warning.

This is not an auction site - posts with links to your ebay items without prices will simply be removed.
Post Reply
RSVR
Site Supporter
Site Supporter
Reactions:
Posts: 163
Joined: Wed May 27, 2009 10:00 pm
NC23 unfinished project 95% done

Post by RSVR » Sun Feb 18, 2018 8:14 pm

This started out as a road bike restoration, however having been to a few race meetings this year I decided to use this for racing, however looking at the competition, I have now changed my mind and have been lucky enough to pick up a nice spec ZXR400

Every nut and bolt has been zinc plated, and most parts have been powder coated, most parts are brand new from the likes of GF racing and it has cost a shed load of money, would make a cracking road or track bike!

Enjoy reading as follows

Engine and exhaust

Rebuilt with new rings & light hone
Cylinder head rebuilt with new inlet valves x4 and collets
All valves relaped
New shims to obtain correct valve clearances
New Honda head and base gaskets
Powder coated rocker and side cases
New ngk spark plugs
New oil and filter metal 5000
GF RACE ECU HRC MAP
GF FULLY REBUILT CARBS WITH NEW HRC MAIN JETS TO SUIT PIPES
NEW GF HRC COPY SYSTEM
New alloy end can

Frame and swinger
Full strip and new bearings
Painted rear swinger
Powder coated rear sub frame
Powder coated standard clipon
All brackets either zinc or powder coated

Suspension
GF REWORKED front forks with fresh oil
GF REWORKED CBR600 rear shock with 80kg spring

NEW CBR600f4 radiator
New Samco hoses

Wheels
Freshly powder coated NC29 rear wheel with new wheel bearing and good BT90,s
Freshly powder coated nc23 front wheel with fresh bearing and brand new front discs good BT90

Electrical
New plug
New leads
New coils
New rectifier
New fuel pump

New chain
Rental sprockets
New Cush drive bushes

Race fairings
Honda seat unit

Spares
X2 NC23 wheels
Spare tank great condition just light rust on inside
Spare coils good
Spare leads
Spare swinging arm
Spare alloy clip on
Spare stainless headders

Still have the lights etc,

Currently got std rear sets

The only major thing left is to refurbish the brakes ( I had already started but not completed it needs pistons up front, comes with HH PADS

comes with race fairings and Honda rear seat unit

As you can tell lots of time and money spent, time for someone to pick up a bargain as I need the space and funds for the zxr400

Would rather sell complete, but would consider splitting if enough interest

£1500 the lot

Mart

CB1pod70
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 318
Joined: Thu Apr 09, 2015 1:55 pm
Location: Gravesend
Re: NC23 unfinished project 95% done

Post by CB1pod70 » Tue Feb 20, 2018 10:27 am

Where are you located?

RSVR
Site Supporter
Site Supporter
Reactions:
Posts: 163
Joined: Wed May 27, 2009 10:00 pm
Re: NC23 unfinished project 95% done

Post by RSVR » Wed Apr 11, 2018 6:43 pm

Caldicot NP26


Post Reply

Return to “Bikes For Sale”