Page 1 of 1
Front discs, NC30
Posted: Thu Apr 28, 2016 5:52 pm
by Burbage
Mot due soon so need new front discs after the tester noted that they are very close to the minimum thickness at the time of the last MOT. Looked around the internet and see that Wemoto do a pair of pattern discs for £200. Anyone tried these and are they any good?
John
Re: Front discs, N30
Posted: Thu Apr 28, 2016 6:26 pm
by Yakama
Speak to Rick Oliver I'm sure he has them cheaper and he wouldn't sell crap
http://www.400greybike.com/files/new%20stocklist.doc
Re: Front discs, NC30
Posted: Fri Apr 29, 2016 7:40 am
by Burbage
Looked at that, EBC discs at a reasonable price but still quite expensive compared to the Wemoto offering.
Re: Front discs, NC30
Posted: Fri Apr 29, 2016 6:56 pm
by Yakama
He has Arashi too for £160 a pair, several people have bought them on here
Re: Front discs, NC30
Posted: Fri Apr 29, 2016 8:37 pm
by Icemaestro
Yep I have them, seem good
Sent from my iPhone using Tapatalk
Re: Front discs, NC30
Posted: Sat Apr 30, 2016 4:31 pm
by Burbage
Might give those a try then.
Re: Front discs, NC30
Posted: Sun May 01, 2016 3:43 pm
by Burbage
Does the Arashi disc have a steel or aluminium centre? The Wemoto offering has a steel centre, adds about 0.8kg weight.
Re: Front discs, NC30
Posted: Sun May 01, 2016 7:25 pm
by jim157
Burbage wrote:Does the Arashi disc have a steel or aluminium centre? The Wemoto offering has a steel centre, adds about 0.8kg weight.
They have gold anodised alloy centres.
Re: Front discs, NC30
Posted: Sun May 08, 2016 9:02 am
by Burbage
The reason I asked about the Wemoto discs us that I had the opportunity to by some spares from an ex VFR owner. Included in the now done deal where a pair of unused discs. Now fitted along with new (Armstrong) pads and fork seals, MOT passed, taxed for the next year. I would have bought from Rick Oliver if these had not been available.
John