Hi , I think I`ve put this in the right place now

As you can see not the prettiest sight but will try to keep things as original as possible , pics show what I`ve done to date, only got the bike at Christmas (a present to myself) and things are moving along , Forks will be rechromed , powder coated frame, subframe and swing arm , repairing the plastics as would like to keep original , and sorting everything else out

Blimey, you've got your work cut out with that!

Wow ...good luck chap.....

Thought at this stage I would show the latest moves instead of putting them on Photobucket. Getting the swingarm ready for powder coating I had trouble with the pivot bearing wouldn't drift out so did this

Nearly finished with the fairings, repaired the broken bits , replaced lugs and other missing bits , repaired the cracks, under coated and will finish them later

Excellent be good to see when you've got it completed nice n shiney
[emoji106][emoji41]


Sent from my iPad using Tapatalk

Bit more stuff done on the bike, stanchion sleeves down to the metal


Then Etch Primed


Then sprayed and lacquered


Dismantled the shock , cleaned , rebuilt and sprayed


With big thanks to member DarrenIOW, for giving me the lessons , Cheers Mate

Got the bits back from the powder coaters

Looking good!

Wiring loom next , Stripped, cleaned and re-taped