Stripping and sorting my NC I've found the plug leads are rock hard and cracking on a couple of the bends so decided it'll be worth replacing them while I've got the bike stripped down. Now I know the caps and leads are 1 item (and not avail from Honda) has anyone replaced these before and know a cap that will fit and still seal up into the rocker cover? At the moment all I can think of are NGK caps with the original ones somehow cut and chopped then put on top..

Cheers.

Try rick Oliver I believe he sells replacement leads and caps.

Thanks for the reply, hadn't seen them on Ricks price list. In the end I figured the caps were still all fine and probably the best fit on the plugs/rocker cover so I stripped them, unsoldered the HT on each and replaced it. Had to clean up the resistor in each one as they'd a bit of corrosion on the ends so rebuilt them with a bit of terminal grease.. hopefully good to go now.