Hi again everyone, I will try and put the odd photo up of the rebuild on my latest project and my 4/6 3tj hybrid. Just wondering how I would do that onto here off my phone. Cheers.

You might need to use an images host like photobucket, pretty sure there will be threads on here about pic uploads if you use the search fucntions...

You need to host it on a site like photobucket then go to the pic > share > copy link to clipboard and hit the "Direct" link.
Now back on the forum hit the img button above ^^^ and paste the code where it says "here" below, (I've added spaces before the [ so you can see how it would look.

Ok , thanks Chaps. I'll give that a go.

Here's a pic of the thundercat engine 3tj.

Must be Nick

Did you do the conversion ... how did you do the airbox

Hi John, yes it's me hope you're still on the mend. Yes I did the conversion myself . It was all pretty straight forward using the engine mounts from projection up north. I used pod filters and have a nice delivery of power right through the rev range. Cheers.

Still with extra metalwork until at least the end of January. Looking forward to next season

Here's a couple of pics. Very early stages. Need to do the brakes, weld the exhaust, loads of cleaning, polishing and a few bits need powder coating.