Hi all,

A problem I'v found is that the left hand control switch seems to move.

I tryed to tighten the screws but it still moved.

After taking the switch off and seeing what looks like a copper contact plate to the handle bar

Im not sure if i can rap anything around the bar (elec tap) to see if that helped.

Any ideas?

Also im missing the button off the lights (to turn it off and on), anyone know were i could get one?

Thanks all,

Andrew

what bike would this be

Arrrr sorry, that was silly.

The bike is a VFR 400 NC30 1989.

Thanks,

Andrew.

if memoery serves me there are two screws that hold the switch to the handle bars, are they the correct screws?

If the actual swithc is missing its probably easier to source a second hand working switchgear, this will probably fix your
mounting issues too

Hi again,

Yer, it held in by the two screws, although doing them up as must as i could didnt seem to fix the moment problem.

Iv order a new chines one that ill just nick the button off, or if it look and feels good, ill just use that.

Thanks for the help.

Andrew.