Page 1 of 1
Rvf caliper on NC29?
Posted: Fri Jan 16, 2015 7:20 pm
by mattiec321
As above. Are they a straight fit or is it an adaptor plate and fart around job?
Cheers all
Re: Rvf caliper on NC29?
Posted: Sat Jan 17, 2015 2:58 pm
by CMSMJ1
Front?
you need adapters and all that shit.
get some NC30 lowers and you can use NC30 brakes and they are great
Re: Rvf caliper on NC29?
Posted: Sat Jan 17, 2015 3:07 pm
by mattiec321
I thought the nc30 caliper a are the same two piston sliding Nissins as the oem fitment.
The rvf ones are 4pots
Re: Rvf caliper on NC29?
Posted: Sat Jan 17, 2015 9:27 pm
by CMSMJ1
The NC30 ones are also 4 pots and the same design as the RC30 and RS250 ones of the day.
They are bob on.
the RVF ones are the same as early blades and firestorms. They often get swapped for the biggest Nissins from the later cbr6rr and blades/sp1/sp2
If you can get some MC28 fork bottoms then these (or RVF) will bolt straight on.