Page 1 of 2
cbr/sp1 calipers/master cylinder
Posted: Fri Jan 02, 2015 1:29 pm
by richyrd5
So putting cbr calipers on my nc30.what master cylinder to use?i have a cbr radial one.will it work??
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 02, 2015 1:48 pm
by benny
5/8" I think
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 02, 2015 1:50 pm
by richyrd5
Ta.same as your looking for!!
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 02, 2015 8:08 pm
by hunter
I think NC30 master cyl is 5/8".
Re: cbr/sp1 calipers/master cylinder
Posted: Thu Jan 08, 2015 2:22 pm
by JZH
OEM NC30 master cylinder is 14mm, but what matters is to match the master cylinder to the calipers being used (or vice versa). Early 900cc 'Blade masters were 14mm, later ones were 3/4" or 11/16". I don't know about the radials used on the 1000s.
Ciao,
Re: cbr/sp1 calipers/master cylinder
Posted: Thu Jan 08, 2015 10:04 pm
by richyrd5
Thanks for that.im using cbr 6(rr4)/sp1 calipers with a cbr6 rr7 radial master cylinder(11.16)...(isnt 11.16ths 14mm?)
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 09, 2015 11:48 am
by hunter
11/16.=17.5mm.
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 09, 2015 11:58 am
by richyrd5
Ahh.me bad!!!cheers john...
Re: cbr/sp1 calipers/master cylinder
Posted: Fri Jan 09, 2015 10:16 pm
by hunter
No probs richy.
Re: cbr/sp1 calipers/master cylinder
Posted: Sun Apr 02, 2017 8:35 pm
by jamesrm
Dragging up a fairly old topic here.... Richyrd5, did the 07+ 600rr master cylinder fit ok in terms of clearance issues? which brake lines did you use?
I have 04 600RR calipers, lines and MC at present but think my MC could do with a rebuild so tempted by something more modern