Almost finished my rebuild of my rvf minus the carbon airtubes and carbon infills that are on order. Have tried to keep it fairly standard looking and i am fairly happy with the result so far.









Maxton Forks
Maxton Race Shock
Mercury Twin Stack Full Race Exhaust
NHK Steering Damper
Brembo 16mm R1 Radial Master Cylinder
EBC Prolites (Now removed as the blue rotors clashed)
Nissin SP1 Calipers
Hel Braided Hoses
Hel Radial Adaptor
Pazzo Brake And Clutch Levers
Berik Master Cylinder Cover
HRC Cdi
HRC Coolant Reservoir
HRC Rear Brake Reservoir
Rick Oliver/ SES Rearsets
Titanium Gear Shift Rod
Electrex Rectifier
Carbon Front Fender (Tyga)
Carbon Rear Hugger/Chainguard (Unknown but bought from Japan)
Carbon Heel Plates (I Made them)
Carbon Exhaust Hangar (Bought Off Ebay)
Carbon Fairing Infills (Tyga)
Carbon Tank Protector (Unknown)
Carbon Front Reservoir Mount (I made It)
Carbon Airtubes (Tyga)
Carbon Tax Disc Holder (Fibre Lyte)
Carbon Yoke Protector (Skur)
Carbon Clock Surround (Fibre Lyte)
Tyga Steel Screen Brace
Tyga Lock Stop Reducer
Sparco Billet Fuel Cap
MRA Airflow Screen
Renthal Medium Superbike Grips
Redial MPH Conversion
Honda Locking Valve Caps
Single Seat Cowl
Alloy Preload Adjusters
Probolt Alloy/Stainless Steel/Titanium fasteners throughout
Probolt Bar Ends
Carbs Running 115 main jets with 0.5 washers under needles.
Had Apex Clipons but prefered the feel of the bike with the standard bars.

Next Purchase: Magteks or Dymags if a set come up cheap enough, Quick action throttle

A few very nice additions there!

Not keen on the rear sets but the Mercury more than makes up for it!

More info on the hugger and exhaust please

perfect.

thats really nice ..

very nice bike mate, i dint know tyga did carbon infills, do they do them for the vfr now aswell?

thats the same hugger smev has, although he had to cut his slightly, dont know what make it is tho

Psychosomatic88, What do you want to know ?. The carbon hugger/chainguard i bought from japan through yahoo auctions. I have a japanese friend who buys me the stuff and ships it to me, Much cheaper than okshon. The make of it though i am not sure. Regarding the exhaust just pm me with questions, It's not quite as loud as my MHP SP1 system i had but it does sound fabulous and is built just as well as the MHP.

Very nice bike mate.

Micro Monkey wrote:The carbon hugger/chainguard ...The make of it though i am not sure.

Looks like a Coerce, but a bit hard to tell from the pics.

Nice bike, plenty of bling happening!

looks great!!!!!!
quite a lot of mods there,what bike are the pazzo levers from,just for reference?


william

The clutch lever is for a cbr600 f4i and the brake lever is for a 2004 yamaha R1.