Hi I hope someone can help; I have a 1988 nc24 and my forks are too badly pitted to bother replacing the seals, so Im looking for a decent secondhand pair. Whilst looking for a pair, Ive seen quite a few pairs of NC21 forks. can anyone tell me if NC21 forks will fit a NC24? I can see that the NC21 forks look slightly different and seem to have an additional fitting near the anti-dive device, but Im wondering if they may still fit without having to change anything else. Can anyone give me the answer?
Thanks for any help you can offer
Dave

This link might help http://www.cmsnl.com/honda-vfr400_model1258/ if you compare NC21/24 forks they look the same. But I don't know how much you can trust these microfiches. One more thing - some ppl fit different forks on old bikes so you can't be sure they are from NC21.

NC21 forks are not air-adjustable like the NC24 forks.

They are both 37mm diameter tubes though so they will phsyically fit.

As far as im aware the lowers adn fork tubes are the same so they shold just bolt straight on...

I dont want to say im 100% sure and you have issues but im about 95% sure