can any1 tell me if i can use the pulse coil from a nc30 on nc35??? before any1 says i know there are 2 on the 30 and 1 on the 35 just need to know if i can just use the top 1.

cheers rick72

pretty sure you cannot - the pulse generation and CDI/tacho is all different on the 30/35.

If you are talking to just use the NC30 HW on the 35 - dunno....get it plumbed in and let us know :)

If you just mean the pulse coil component alone then I don't see why it wouldn't work, it's not much more than a magnet surrounded by copper wires with leads.

Let us know.