Page 1 of 1
Gold nissin calipers upgrade
Posted: Sun Mar 30, 2014 5:54 pm
by alexandervf
Hi everyone,
I'm about to install the (taken from a 2004 cbr600) nissin gold calipers.
Do i also have to replace the front brake master cylinder in order for the calipers to function adequately? or will the stock m/c do just fine?
Thanks
Re: Gold nissin calipers upgrade
Posted: Sun Mar 30, 2014 7:18 pm
by alexandervf
Sorry, i rushed. Did a search and found the answers i was looking for....
Thanks
Re: Gold nissin calipers upgrade
Posted: Mon Mar 31, 2014 8:50 pm
by iDemonix
Pop a link to the answer in case anyone stumbles upon this page from the search box/Google with the same question :)
Re: Gold nissin calipers upgrade
Posted: Tue Apr 01, 2014 8:47 am
by alexandervf
viewtopic.php?f=24&t=38450&hilit=nissin+calipers+cbr600+nissin+calipers&start=10
A good thread on this matter. Gold nissin calipers upgrade is a good upgrade for the nc35. I do not know if this applies for the nc30 too.
Re: Gold nissin calipers upgrade
Posted: Tue Apr 01, 2014 10:24 am
by speedy231278
You can fit them to the NC30, however to do so requires an intermediate bracket to go between the caliper and fork leg.