Page 1 of 2
NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 11:05 am
by NGneer
Anyone got a rear Wheel R Pin (like this.
http://japan.webike.net/products/1057146.html ) Handy that they Could take a couple of measurements of?
The local equivalent of B&Q out here has several sizes of these so thought I would stock up, but short of riding the bike down the aisle to test fit the pins, I am still left guessing between about 3 options which all look pretty close to me.
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 12:51 pm
by Drunkn Munky
Ive got a TSR R pin i'll go and measure in a bit, i tried a while back finding a suitable R pin and ordered a whole range of sizes from ebay and none fitted properly. They maybe expensive but they work and look decent too
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 2:34 pm
by NGneer
Drunkn Munky wrote:Ive got a TSR R pin i'll go and measure in a bit, i tried a while back finding a suitable R pin and ordered a whole range of sizes from ebay and none fitted properly. They maybe expensive but they work and look decent too
Cheers Tony
I noticed these R pins in the local B&Q equivalent a few weeks ago and keep meaning to check as there a a few sizes and they were quite cheap (from what I remember). I have the good old fashioned Split Pin on the bike I have out here at the moment otherwise I would have just whipped that one out to compare.
If they do have a size to suit - it would seem rude not to pick some up wouldn't it
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 5:12 pm
by jim157
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 7:13 pm
by NGneer
Jim - very true and even on the continent via Tyga EU, they are only €2 each or rather €2.50 with tax (
http://www.tygaeurope.com/store/product ... en-pro-arm) so just €10 for four (always worth having a sparer). Unfortunately Tyga totaly loose the plot with the delivery charges and delivery for x4 of these little clips (from Germany to Germany) makes the final bill more like €25! - yes the postage is more than the items themselves
Hence if I can get a size guide - I can just go to the shop in town pick some up for about €2 each and not being raped for the delivery in the process
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 7:44 pm
by jim157
Oh blimey, I didn't realise shipping was so expensive from them.
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sun Feb 23, 2014 10:10 pm
by micpec
NGneer wrote:
Jim - very true and even on the continent via Tyga EU, they are only €2 each or rather €2.50 with tax (
http://www.tygaeurope.com/store/product ... en-pro-arm) so just €10 for four (always worth having a sparer). Unfortunately Tyga totaly loose the plot with the delivery charges and delivery for x4 of these little clips (from Germany to Germany) makes the final bill more like €25! - yes the postage is more than the items themselves
Hence if I can get a size guide - I can just go to the shop in town pick some up for about €2 each and not being raped for the delivery in the process
Eerrrhm, I do not understand..."Germany to Germany"...they are located here in the Netherlands
I have spoken with the owner Henrico a couple of times.
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Mon Feb 24, 2014 1:55 am
by BillingCBR
I could always tag one onto the group buy if you want?
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sat Apr 19, 2014 8:58 pm
by spenceley1
Any update to this? Could do with one but nothing on ebay or David silver and can't seem to find through tyga UK?
Re: NC30 Rear Wheel R-Pin dimensions.
Posted: Sat Apr 19, 2014 9:27 pm
by Drunkn Munky
if someone wants to remind me in the morning I'll go measure mine