Stripped the bike a long time ago and forgot to take pictures so now I'm stuck on a few connections.

Any idea's where these 2 connections go?





Also stuck with this one...

Figured those 2 connection blocks...feel stupid now.

Any idea's where the other wire goes in the last picture?

Single wire? it'll be for something like the temp sender on the stat housing, or neutral switch , oil switch. Carb warmer.
I recognize it but can't remember exactly what it is.

It should slide onto a flat tab located on the lower left front of the housing you have pictured. A lot of the time they are snapped off. You can almost see it below the blue wire in your photo.

rgvsp wrote:It should slide onto a flat tab located on the lower left front of the housing you have pictured. A lot of the time they are snapped off. You can almost see it below the blue wire in your photo.

Thanks buddy........I don't think it was ever connected.

Where would I get the spade thingy, for it to connect to?

Got a few more wires I have no idea where to connect, will post them up, when I have time.

Cheers fella's

A better picture for clarity;

Part number is 34850-82012. Looks like a common Suzuki temp sensor. I'm sure you can find the whole unit on Ebay as well.