This is my 1st post as i have just passed my test and brought a NC23!!!!!!! YES

Only problem i have with it is some times the Neutral Light does not come on.....The Guy i got the bike off told me about it and he thought it might be the bulb?

Does anyonr have any ideas!

Kind Regards

Probably the plunger on the neutral light switch has worn, they usually wear at an angle and if you're lucky you cand file it flat and carry on using it.
Its on the bottom of the engine on the left had side ( as you sit on the bike)
Careful as the oil will run out when you undo it.

Thanks for the help! i will give it ago when i get in....Where on the engine am i looking and what does it look like.

Kind Regards

You should realy get a haynes manual.

I just picked one up today!!!!

Cool! Have you found the neutral switch?

problem sloved thanks for your help