just wondering what levers you guys would recommend for my nc30? the standard ones do the trick, but im treating myself and the bike, so i thought id ask opinions...
thanks guys!

Don't go for those crappy anodised levers. Hondas are a bit fussy with levers - crappy ones don't let the fluid return properly. Go for CRG or Pazzo. Not sure what ASV are like, but they look good.

tyga now do billet ones too

http://www.jap4performance.com/hondaNC30.html" onclick="window.open(this.href);return false;

about 1/3 of the way down.

They look tasty, but they're pretty expensive for a lever that is basicaaly the same as standard but not forged. Still gonna break in a drop/off/lowside.

was thinking about the tyga ones, but really the only reason id buy those is if my standard ones were broken...
fancied somrthing a little snazzy-er....
and yeah ive heard some horror storys about "pattern" levers....

titax do good quality levers (there a new company like pazzo and crg) and there slightly cheeper than pazzo etc, think about £110 for a set

I have a set of Pazzo levers. Cost me £150ish for the pair, but oh my do they look preety.

Or you could go for the full BSB ones that they sell for around £200 each side.

the ISR stuff's nice that was my route but it aint cheap! £250 for the brake and £100 for the clutch. obviously the brake is a radial mastercylinder... but they have loads of adjustment and do work well!

Brembo radial lever if you want bling!

I have crg's and they work and feel great.