Hi,
Does anyone have one of these going spare or no how to make one?

Thanks in advance :)

http://www.cmsnl.com/honda-vfr400rg-ya- ... partslist/

Read the parts list and use david silvers to get a price.

Thanks, but I've already tried that idea, I email David silver spares and they said that they could help because Honda had discontinued the part I was looking for!

Probably best then to put a wanted ad in the classifieds.

It's not very clear to me what part you're after from your description- just a bolt?

If you put a pic/photo/link up then it would be easier for others to see what part you're after.

Okey dokey ill get right on to it!

and try reading the FAQ and sticking it in the correct section please.

I see, well it would help if you wrote that they are discontiniued. Your question sounds like how do I find one as in you don't know the part number, ergo my answer.

As for making one, yes I do know. You would need a lathe capable of screwcutting at the correct pitch for the bolt and turn something down. Not difficult if you know how to do it but since you asked I will assume you don't know.

The later NC21s and NC24s also use a different bolt.

Since your after an obsolete part it is best to search ebay and other places for somebody breaking a bike and ask them if you can buy the bolt.

After putting up an add in the proper section

Ill look in to making one or getting one made as I don't have a lathe, I've posted in the wanted section now and I'm searching high and low for a breaker but no joy yet!

Thanks for you help

Tbird,

I was waiting for you to put an ad up in the wanted section before I posted, but I've literally just sold a LHS hanger and gearlever, among a bunch of other bits, to pilky from here - I've asked him to check if he needs the pivot bolt, and if not, to send it on to you.



I suggest you drop him a PM about it.

Dale