02 SP2 callipers and master cylinder. Sweet.

Well my Winter update has started in full force.

The newly powder coated wheels are here and i have got brand new rubber on them.
So They will be going on in the next few days. Then it is time for the new callipers to be fitted. With some swanky CRG levers.

looking good..........what bike are the crg levers from or for?

Well i will need a SP2 brake lever and a NC30 clutch. But i have just been to the web site and you cant get them any more, but there are about 30 different CBR 600 models on there so i am sure one will fit.

Any one got any ideas ?

I am sure the company will know.

Very pimp dude.

get them discs off Smev and you are rocking for a kickass front end...

Very nice.

How much did they set you back if you dont' mind me asking?

matty_boy wrote:Well i will need a SP2 brake lever and a NC30 clutch. But i have just been to the web site and you cant get them any more, but there are about 30 different CBR 600 models on there so i am sure one will fit.

Any honda sports bikes that don't use radial levers (most pre-2004 bikes don't) will fit.

Callipers and master cylinder where £100 plus new pads say £40 then the Rick Oliver fitted kit. I already have some braided lines that fit so i sort of saved a few pounds there.

You dont need to change the lever but the SP2 lever is about 3 foot long, plus i have been after some nice trick levers for some time. The CRG ones come in at about £130 for a pair.

So i guess you are looking at around £200 for all the parts you need for the upgrade, depending on what callipers you use.

Matty.

As for levers i only need to find a replacement for the NC30 clutch as they stock a 02 SP2 brake.