Marcus's Honda nc35 RT
Posted: Sun Feb 03, 2013 6:45 pm
Thought I'd get this started on my way back from collecting it , 3/4 of the way back on a 650 mile round trip. Proper bored now .
I've been after a 35 for a while but I had a strict budget I wanted to stick to , nothing really came along apart from crm's bike a few weeks ago until this one turned up on eBay , although it was nearly twice my budget the previous owner had spent a fortune on it and has done most if the hard work , cheers!
A quick run down of the bike and spec
96 nc35 RT colour scheme
Stripped down to frame and engine
All brackets and fixings re painted or powder coated
All bearings replaced , rebuilt forks and calipers
Brand new RT fairings from honda , including upper , mids , lowers , v piece , mud guard and seat unit
Tank re sprayed
New Nitron track shock
New tyga system
New tyga rearsets
Tyga leavers
Samco hoses
Carbon infills
Re covers seats ect ect
As you can see the previous owner has completed most of the hard work and then left it for 18 months .
I have a few things to do to get it on the road , replace genny windings , rebuild the master cylinders with the kits supplied and to fit the bodywork , it also came with a bag containing most of the fairing bolts new from honda .
There are a couple of small things I would like to do but I'm skint for a while .
I will get some pics up when I'm home .
I've been after a 35 for a while but I had a strict budget I wanted to stick to , nothing really came along apart from crm's bike a few weeks ago until this one turned up on eBay , although it was nearly twice my budget the previous owner had spent a fortune on it and has done most if the hard work , cheers!
A quick run down of the bike and spec
96 nc35 RT colour scheme
Stripped down to frame and engine
All brackets and fixings re painted or powder coated
All bearings replaced , rebuilt forks and calipers
Brand new RT fairings from honda , including upper , mids , lowers , v piece , mud guard and seat unit
Tank re sprayed
New Nitron track shock
New tyga system
New tyga rearsets
Tyga leavers
Samco hoses
Carbon infills
Re covers seats ect ect
As you can see the previous owner has completed most of the hard work and then left it for 18 months .
I have a few things to do to get it on the road , replace genny windings , rebuild the master cylinders with the kits supplied and to fit the bodywork , it also came with a bag containing most of the fairing bolts new from honda .
There are a couple of small things I would like to do but I'm skint for a while .
I will get some pics up when I'm home .