hi a friend has just bought a vfr 400 but needs some parts, he has no computer and im looking for them for him. my question is ive come across nc24 nc30 and nc21 are these all the same?. he needs rear pots and disc so if they are different are the parts same/interchangeable?

i would think they would be differant as a nc30 has a single sider!
what model is it?
kev

its single side. no idea on model.

it's a nc30 then. i have got a full rear setup with braided line just no disc with brand new pads if interested???
hel line is coated black and like brand new.
also has hrc res

kev

NC24 also has single sided swingarm.

If it has 4 bolts holding the wheel on then it is NC24

If it has one big central bolt it is an NC30

CMSMJ1 wrote:NC24 also has single sided swingarm.

If it has 4 bolts holding the wheel on then it is NC24

If it has one big central bolt it is an NC30

Just to mix it up it could be an NC30 / 35 with a VFR750 rear conversion.

The best way is to check the frame number.

NCXX is what it starts with, the frame number is at the front where the yokes go through.

IT will start with NC XX, the XX is your model number. ^_^

another way to check is the nc24's exhaust comes out on the right quite high up (almost under the seat). whereas the 30 comes out on the left alongside the swingarm.