Can anyone help me with the exact dimensions and high resolution pictures of all the genuine honda rvf400 NC35 labels that came with the bike straight from the honda factory?

I am not near my bikes at the moment (are locked in storage for the salty roads) and need high res pics of each of the following labels as square on as possible (jpeg format):

87505-MR8-900 Label, tire
87507-MR8-900 H.m.j.
87508-415-300 Mark, Radiator, cau
87511-KR3-600 Label, Helmet Hold (superseeded by 87511KR3670)
87521-ML0-731 Label, swing Arm
87522-MR8-900 Label, windscreen
87541MR8-900 H.m.j.
87560-MJ6-722ZA Mark, drive *typeg*
87565-MR8-900ZA H.m.j.

Getting copies made?

I (and many others!) will be interested in results.

Well, I do have 'access' to some pro machines that can do high quality printing but need some high res close up pics + the correct dimensions to try first. Can you help me with some pics, Cammo?

you can send them to: rvf400(at)ziggo.nl

did you mail me asking for pictures? i am sure i saw something but was in the middle of a stress so prob missed it or thought "i will look at that later" then forgot

I only have an nc30, it doesn't have most of these stickers. Will see if there's any that are common to both models.

Quite a few available new according to CMS http://www.cmsnl.com/honda-rvf400rt-nc3 ... ml#results

I am planning on buying a few that are the same as the NC30 ones in the coming weeks so i will get some good photo's for you when i do.

Hi micpec, would you be able to print some to suit the nc29? I have scans and sizes all ready. The last bloke i asked got the scans off me after showing great interest and then promptly stopped all contact once he got the scans, why, i dont know? I was going to pay for them..

Dave

Hi Dave, I have tried nor printed any yet. Only preparing as I got hold of some specialist paper and stuff and have access to some industrial laser printers. Are the ones for NC29 different to NC35s? I have not checked the SPEC list on cmsnl. I know some decals are still available from Honda but it's the fun factor. In my list are also some tsr and ethos decals and few other treats. Would you mind sending me the scans and sizes? Send to mail addressed above posts. I know outcome is maybe not as genuine but worth a try.

Hi mate. As it happens i put them on a google site i made up a while ago. some may be relevent to the 35. will mail you the sizes tomorrow when im off work. They are in the decals list as pdfs. https://sites.google.com/site/cbr400rrr ... -magazines

Finally time to do some further (re)search as my project at my contractor is now finished and I have time left. I just ordered a full set of new genuine honda rvf labels, I know..very expensive. Hope to have them here next week. Next step, off to some laser machines.