hi all i am new here and am about to start my nc30 project ... just as soon as i finish my kitchen that is... apart from buying the bike and soaking her with wd40 ... and a quick look around ...thats about as far as i have got ..... now to the point ..... forget the for play .... i might have a set of RVF 400 NC35 wheels as a friend is selling his and i mentioned swapping the wheels .... oooooo 17inch front and back ..... thats the idea ? but all i can find out is that the back will fit and will need the link from the rvf to get the hight right ? .... but is the front a straight swap with the discs fitted / please help i need to move fast or i will loos out ...

for some unknown shizzal ? i am getting msg saying ...........Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks............. this is not an add honestly .... just need some help please

The front wheel/disks are a straight swap between the NC30 and the 35.

sounds like you have done what i am planning ? so just a matter of switching the wheels ? ...... thanks mr jim157 :)

I haven't done it mate but it's a pretty common 'upgrade'. I believe you'll have to use the NC30 spacers with the front NC35 wheel but apart from that it's a direct swap. The rear is a straight swap, apart from the aforementioned ride height issue.

simon rc51 wrote:for some unknown shizzal ? i am getting msg saying ...........Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks............. this is not an add honestly .... just need some help please

You always see that message, its just a reminder.

Anyhow, yes you can fit both without doing anything.

As you have already mentioned, if you don't change the RVF shock linkage as well the ride-height won't be right and will affect the bike a little.