Right it seems that all my pilot screws have been broken off so there's no screw head to undo them, does any body know how I can get them out and where i can get some replacements along with the fuel filter inside the tank that goes over the fuel tap?

Regards Matt

Id be tempted to drill them slightly to provide enough of a 'head' to get a screwdriver in, just be careful not to damage the thread of the carbs!

Also for spares I have used www.cmsnl.com as they do pretty much anything, I used them for my tank filter, and other bits. although they are expensive as it from Holland!

or try wemoto, david silver spares, or Greame France