after my sister knocked my bike over and damaged my original panels I am torn between these following

Same as original panels

http://www.ebay.co.uk/itm/90-04-for-Hon ... 19d2d0212d

or these :-)

http://www.ebay.co.uk/itm/90-04-for-Hon ... 19d2d0233e

the latter will require my tank spraying top match what do you reckon ?

bike below prior to the drop off paddock stands !!!!

http://www.bikepics.com/pictures/2140200/

nice bike, how bads the originals? maybe if they are close enough you can just buy the panels you need from the first seller.

Id go same as the originals, unless the tank needs a respray any way??

interesting position of your rear brake caliper...:) nice clean bike...
Col

Heelo mate,
i have just bought and fitted the rothmans kit from needformotors as on your thread and value for money they are very good, a few holes needed filing and you need to buy some self tappers with the retaining clips, but to be honest i think they are excellent i had to respray the tank to match,
also make an offer i did got the full kit for £260 which includes import tax at £22,
im happy and totally transforms the bike,
Regards Phill
i shall have to take some pics and try and list them here,

phillcbx wrote:Heelo mate,
i have just bought and fitted the rothmans kit from needformotors as on your thread and value for money they are very good, a few holes needed filing and you need to buy some self tappers with the retaining clips, but to be honest i think they are excellent i had to respray the tank to match,
also make an offer i did got the full kit for £260 which includes import tax at £22,
im happy and totally transforms the bike,
Regards Phill
i shall have to take some pics and try and list them here,

Have you got any pics mate?

Cheers
Luke

I bought the tricolour ones from ebay and the tailpod didnt fit at all and the rest of the fairing needed work doing to them to make them fit, so if your expecting to bolt them straight on you will be very surprised like i was and you will have to make, brackets for your wiring and fuse box to sit on your fairings like stock,and one or two little ones drill a few holes and file all the hole or re drill them as the people who made them dont understand the meaning of drillin in the centre some of the drill holes are shocking, but once you fibregalssed up few shit drill holes under the fairings and made the brackets you can barely tell the difference between the originals and the knock off versions