Are there differences between both? I think I've an RVF wheel carrier. Are the splines on the RVF rear wheel axle bigger than the VFR and will the VFR sprocket carrier work on the carrier?

This is the piece I mean,

Splines



In the hub you'll see the gap,

Can anyone measure the splines of an RVF and let me know the size please?

Thw complete axle assembly is half the price for the RVF so there must be a difference, not sure what tho but i have a RVF axle in a 30 swingarm and it seems to work fine.

I'm wondering if this might even be an axle from a Bros???

If you zoom in you might be able to compare the one you have with this one which is RVF

That RVF one looks like it has a fatter spline on it. It seems to have a step on it that gets bigger in size, unlike the VFR one. Is that still loose in the garage Tony?

Its loosely fitted to the track bike but i can whip it out later easily enough if need be

If you could that'd be excellent. I'll measure the VFR one I have and see who's is bigger

OK, so the VFR is about 80mm at the splines.

I have just been in garage to find out the anwser as this is something that i have not found in 5 years and yes there is a difference and i will be back in mo with a photo posted chaps..
Whatch this space.

Simon.