Page 1 of 1
Head bearings
Posted: Wed May 30, 2012 1:30 pm
by Tomzed
Head bearings what's the difference between oem and taper roller
What would people recommend and why
Re: Head bearings
Posted: Wed May 30, 2012 2:30 pm
by Drunkn Munky
This might help
viewtopic.php?f=24&t=34649&p=249704#p249704
For what its worth i went for OEM honda, cant really go wrong then
Re: Head bearings
Posted: Wed May 30, 2012 2:44 pm
by Tomzed
Also is there any difference in the upper and lower dust seal as dss only stock one which is labelled lower dust seal
Re: Head bearings
Posted: Wed May 30, 2012 6:16 pm
by Drunkn Munky
Yes
Re: Head bearings
Posted: Wed May 30, 2012 6:26 pm
by viper_biker
Always replace the lower one as you'll most likely damage it when removing the lower race. The top dust seal is usially re-useabe (unless the rubber has perished)