Hi guys

Been tinkering with my new 93 nc30 and ive just noticed that the suspension is set up diffrently on each fork.
I was wondering has anyone got like the standard-ish settings for the forks. I realize that there past there best and im looking at the fork rebuild kit that you guys have recomended but i was wondering if you peeps could help us out ?

Sam

i think for a general/initial set up try about half way, the little brass screw in the centre has about 10 clicks and the larger outer adjusters has about 5 or 6 rings on them (i think) so half way on both adjusters on each leg should get you going, all depends on your weight / riding style and how old the oil etc , not easy as most people have there own preference , trial and error see what works best for you

Cheers will have a go tommorow , Heres a few photos of my bike shes nearly there few more attacks with some autosol and a few more new stainless bolts then were rocking!

https://picasaweb.google.com/1082072991 ... directlink