hi guys
done the carb service using the guide
all jets correct float heights good all my emulsion tubes are 5 holes
is this correct the guide says front 4 holes will this have any affect
on running of bike she seems to run ok
if i need to get new tubes for front are they still availble or does anyone have
a couple for sale
cheers

bullitt wrote:hi guys
done the carb service using the guide
all jets correct float heights good all my emulsion tubes are 5 holes
is this correct the guide says front 4 holes will this have any affect
on running of bike she seems to run ok
if i need to get new tubes for front are they still availble or does anyone have
a couple for sale
cheers

Then the 5 hole ones sound standard, the NC21/24 carbs came with many setups.

Don't follow the carb-service guide too much for the NC21/24 ... i.e do not drill the throttle cables or shim the needles.

The bike should also have 110/112 jets?

thanks my jets are all correct will leave alone
and put back on bike
cheers