Check March 2012 Practical Sportsbikes to see pic of my FZR 400 with YZF 600 engine. Enjoy

Cool
Is there a write up with too ?

Not much write up, they also changed wot i wrote! 3TJ YZF motor, R6 clipons, ti exhaust, needs air box and ram air. Cheers p

Probably just an airbox - the ram air was on the T'Cat but they also had collector chambers on each side. You can run the engine by cut and shutting the Foxeye and 3TJ into one

I need a 3TJ airbox. would you alter the inlets?

Use a T'Cat / Foxeye air box and cut the carb mounts out. Then mount them into the 3TJ air box. Then get it dyno'd

Cool, will try that when i get my hands on 3TJ box. Thanks dude, p