NC30/35 Titanium - Wheel, Hub & Yoke Nuts
Posted: Wed Nov 16, 2011 1:09 pm
All are grade 5 Titanium, plain finish (ie no anodising or polishing, just a plain machined finish)
NC30 ONLY - 41mm Yoke Nut - £19 + £2.99 P&P
36mm Wheel Nut - £25 + £2.99 P&P
46mm Hub Nut (Reusable) - £29 + £2.99
All 3 bought together as a discounted set = £60 + £2.99
these will be available in 5 weeks time, i hope there is as much interest as before but this time this is a GO'er
EDIT:
the hub nut with the holes drilled and split/R pin may cause you problems on a paddock stand, i think you can stake the nut tab in, but then it isnt reusuable, so ideally for Abba stand users or if you happy to remove the split/R pin each.
the holes i think will be 3mm Dia and will require drilling the hub and posibly the wheel spindle,
International shipping is £3.99, or £7.99 for signed-for.
I keep proof of posting and I won't accept any responsibilty for stuff going missing in the post if it's not sent signed-for.
NC30 ONLY - 41mm Yoke Nut - £19 + £2.99 P&P
36mm Wheel Nut - £25 + £2.99 P&P
46mm Hub Nut (Reusable) - £29 + £2.99
All 3 bought together as a discounted set = £60 + £2.99
these will be available in 5 weeks time, i hope there is as much interest as before but this time this is a GO'er
EDIT:
the hub nut with the holes drilled and split/R pin may cause you problems on a paddock stand, i think you can stake the nut tab in, but then it isnt reusuable, so ideally for Abba stand users or if you happy to remove the split/R pin each.
the holes i think will be 3mm Dia and will require drilling the hub and posibly the wheel spindle,
International shipping is £3.99, or £7.99 for signed-for.
I keep proof of posting and I won't accept any responsibilty for stuff going missing in the post if it's not sent signed-for.