Page 1 of 7
HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 12:57 pm
by RickOliver
I am poised on the brink of getting a batch of replicas of the proper HRC rubber bellmouths for NC30s made.
The price will be no more than £25.00 per set of 4 (if they were still available the RRP of the Honda original ones would be around £40.00/set now)
Ideally I would need to sell at least 15 sets to make this financially viable.
Anybody interested?
If so please post below...
Thanks,
Rick
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 1:11 pm
by scooble
that sounds like a reasonable price, I'd be interested. What other jetting changes would also be required?
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 1:31 pm
by RickOliver
Effectively these are the `last piece of the jigsaw` for the HRC carb kit which I already supply...
Rick
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 1:46 pm
by porndoguk
stick me down for a set Rick.
Rick
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 5:29 pm
by hunter
I'll have a set.
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 5:30 pm
by reverse cylinder jim
I would also like a set please Rick.
James.
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 6:29 pm
by Drunkn Munky
I'll take a set
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 6:36 pm
by fatkid_loves_cake
I'll have a set please
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 8:26 pm
by Jamboy
I'll have a set mate please
Re: HRC Bellmouths for NC30
Posted: Mon Oct 10, 2011 10:55 pm
by Cammo
I'll take a set Rick.