are they the same ? and if they are. anyone know where i can get some second hand stantions from ?

ebay?

Slight differences, NC24 uses air-suspension, NC21 doesn't.

Calipers will swap and both are 37mm can can chop and change.

will nc 30 forks fit if i got the calipers / wheel and brake disc of one

No chance.

There 41mm forks so you'd need the triple clamps, handlebars, and switchgear, which would all need rewiring to suit the loom but the biggest problem is that the NC30 forks are WAY too short.

about 65mm too short.

thanks for the advice do u know a good breaker that might have some nc24 forks in because thay are like rocking horses sh@? on ebay thanks john.

I got a set of NC21 forks plus triple clamp i can sell you, Ill dig them out and pm me your email and ill give you pics and work out a pricehh

whats actually wrong with your forks

deep pitting in the travel on the stantion on the right hand fork if sat on the bike

john21z wrote:deep pitting in the travel on the stantion on the right hand fork if sat on the bike

You can buy replacement stantions quite reasonably by 3rd parties, LM spares do some IIRc

Nice one Neo. I may need a set of them soon, gotta save up, £194.75 for both fork tubes. but it'll be worth it as i'm fed up replacing seals.

http://www.lm-spares.co.uk/acatalog/VFR ... NC24_.html