Page 1 of 1

Nc 24 slides

Posted: Wed Sep 28, 2011 12:36 pm
by yazza54
Where can I buy a set to try in my nc30?

Re: Nc 24 slides

Posted: Wed Sep 28, 2011 1:14 pm
by CMSMJ1
from someone breaking some NC24 carbs?

Re: Nc 24 slides

Posted: Wed Sep 28, 2011 1:15 pm
by yazza54
Can't find any on the bay, dunno where else to look

Re: Nc 24 slides

Posted: Wed Sep 28, 2011 2:34 pm
by Neosophist
They might make a slight bit of different at full WOT but i doubt there will be any noticeable difference

Re: Nc 24 slides

Posted: Wed Sep 28, 2011 4:08 pm
by CMSMJ1
NO - I flogged mine..

Re: Nc 24 slides

Posted: Wed Sep 28, 2011 4:23 pm
by yazza54
Saves me the bother thanks for the advice, rick oliver also said it wasn't worth much money or effort

Re: Nc 24 slides

Posted: Fri Sep 30, 2011 3:53 am
by BillingCBR
Just as a point on these slides, both Ricky and I have NC24 slides, mine have 2 holes, his only have the 1, which are closest to HRC slides for an NC30? :peace:

Re: Nc 24 slides

Posted: Fri Sep 30, 2011 11:44 am
by Neosophist
BillingCBR wrote:Just as a point on these slides, both Ricky and I have NC24 slides, mine have 2 holes, his only have the 1, which are closest to HRC slides for an NC30? :peace:
The two holed NC24 slide is the same as the HRC slide. Never had two at the same time to put side by side but i'd bet they are identical

Re: Nc 24 slides

Posted: Fri Sep 30, 2011 8:40 pm
by BillingCBR
Cool, looking at a page on Akhara the HRC slide has 2 holes, as per this picture (came from a set of full HRC carbs)

http://www.akhara.com/nc30/nc30hrccarb/ ... age14.html