Page 1 of 1

Start/stop - kill switch

Posted: Tue Sep 13, 2011 8:31 pm
by gullarm
Anyone know what other honda bike has the NC29 start/stop switch fitted.

Mine is grey and faded and looks rubbish.

Im not bothered if the wiring block on the end of the cable is different, I can soon swap that over or resolder new wires.

Most of the ones on eaby are the same old faded junk like mine.

Any ideas.

Please!

Re: Start/stop - kill switch

Posted: Wed Sep 14, 2011 2:48 pm
by amorti
Well it certainly looks a lot like this one?

http://www.ebay.co.uk/itm/Honda-CBR1000 ... 519adbf901

Re: Start/stop - kill switch

Posted: Thu Sep 15, 2011 12:13 am
by spandex munkey
I was wondering this too. Could do with both left & right switchgear. Do the earlier Fireblade left hand ones fit the 29?

Re: Start/stop - kill switch

Posted: Thu Sep 15, 2011 12:32 pm
by Davez29
spandex munkey wrote:Do the earlier Fireblade left hand ones fit the 29?
I believe they do although check on type first as they did change them but if you have an R model without a on/off light switch an RVF400 will fit and I believe its the same as one of the vfr750 models, again check before you buy.

edit: Just remembered I have an old left hand switch top, fits a L or N model NC29 with perfect white text, virtually no marks to the plastic. Theres no wiring or switches, just the plastic top. A bit of a swap with your old gubbins and your left hand switch would look brill. If anyone wants it, its there. preference to peeps already posted here if needed.

here.. Image

Re: Start/stop - kill switch

Posted: Sat Sep 17, 2011 12:36 pm
by gullarm
I managed to get a new - 2nd hand one - off ebay that is 99% perfect.

The guy didnt know what bike it was from so I took a punt on the picture and it was the correct one.

Still looking for the RHS - need one thats in good looking condition and not too expensive.

Re: Start/stop - kill switch

Posted: Sat Sep 17, 2011 1:51 pm
by spandex munkey
Durka pm sent