Does anyone make a nice rear hub nut for the nc? Had a hut around online but nor found anything .

would be interested in one aswell marcus if available? i ended up buying a new original from silvers i think it was in the region of a tenner as i got fed up looking at the tarnished one i had on the bike.

Guy under username underboat on ebay did a stainless one while back, was some Ti ones floating about while back as well.

abrmoto wrote:Guy under username underboat on ebay did a stainless one while back, was some Ti ones floating about while back as well.

ti, will have to check him out

If there was enough intrest i wonder if we could get a group buy together , might help with the costs

In be interested.

Now then,, I would also be very interested in buying 1 of these? i have looked for a while now to find replacement nut/s, 1 for the rear hub/sprocket carrier and 1 for axle/wheel nut, had no luck so far.
I agree, the original nuts look poor on my nc30 and im keen to replace asap? I think you will get plenty of interest of other members.. keep us posted.

Moore

abrmoto wrote:Guy under username underboat on ebay did a stainless one while back, was some Ti ones floating about while back as well.

just searched his name on ebay but i cant find him on there

I've bought a ti shifter rod from him. I'll find his details.
Here we go;
http://www.ebay.co.uk/sch/underboat96/m ... rom=&_ipg=

Hadies wrote:I've bought a ti shifter rod from him. I'll find his details.

so have i, found him and just sending an email to him

mail sent, will have to wait and see