Hrc rear axle ? seen these mentioned a few times and was wondering what they actually are and what the difference is over standard?

A rear light like this , http://japan.webike.net/products/19873289.html , would it be hard to make ?

35 yokes into the 30 frame , so i need the kit from rick o or can you swap the stems over between the two?

What calipers are a straight fit onto 35 forks without adapter brackets , apart from standard obviously?

Got loads more things in my head i was going to ask but i cant remember and its probably been covered a million times already .

i do know there is a member on here that can make them rear lights using led's....so it is definitly possible.
what would be good is if the outer edge of each light could be amber and be used for indicators

sorry but i cant answer any of the other Q's.....

Hrc rear axle ? seen these mentioned a few times and was wondering what they actually are and what the difference is over standard?

it's lighter.

A rear light like this , http://japan.webike.net/products/19873289.html , would it be hard to make ?

dunno, but i wouldn't want it.

35 yokes into the 30 frame , so i need the kit from rick o or can you swap the stems over between the two?

easier just to buy the kit from rick plus if you sell in the future,you can sell the forks and yokes as stock items and the kit to someone who wants to do the mod

What calipers are a straight fit onto 35 forks without adapter brackets , apart from standard obviously?

sp1/2 ,some blade ones.

Got loads more things in my head i was going to ask but i cant remember and its probably been covered a million times already

keep them coming.....