Hi Guys, I’m still busy with my VFR NC24.
Can someone please post some pic’s of the rear foot pegs and there brackets for the NC24.
I can’t find them here in SA or any pic’s on google. The only ones I could find were R500 per side just for the bracket making it R1000 for 2.
I know a guy that is pretty good in metal work how can make them for me but I need a photo of the howl bracket. The previous owner took them off when he made the bike a one seater.

http://cgi.ebay.co.uk/HONDA-VFR400-NC24 ... .m14.l1318" onclick="window.open(this.href);return false;

thats the left side with the helmet holder

Last pic shows exhaust hanger too

left rear without the helmet lock,(never worked since I got the bike so off it came)

Thanks a 1000000 guys.
This will help a lot.

spooky wrote:

How come thats so shiney?

Neosophist wrote:

spooky wrote:

How come thats so shiney?

I removed the crappy sleeve that covers the silencer by grinding off the welds and unwrapping it, then flushed off any remaining welds. Then I cleaned it up with a flapper wheel,wet&dry,then polished it with a mates polishing mop/buff. Its all s/steel under the sleeve.

Awesome! Mine fell off as I forgot to tighten the bolt, hence needing the new springs as they stretched but did a good job holding the exhast near the bike @ 80mph to stop me leaving it in the inside lane of the M42. (note to self, never just 'place' bolts there, tighten them up right away) and scratched the buggary out the sleeve.

Will be gettin the grinder out tomoz :)