Hello, me again!

Dismantled the rear shock today and on the linkage pivot arm youv'e got the 3 spacer's, ive taken out the bottom two+dust seals, however having trouble with the top one(smallest), is this supposed to be removed or is it a bush? Got a Haynes but still not clear. If it is not supposed to be removed is it supposed to rotate as this one wont budge.

Thanks.

The top one doesn't come out it's a bush. Check the parts manual to confirm

Yes it's a bush and does not rotate.... I have converted mine to a roller bearing (as per the NC35) and have a Honda bush still in packet if you want it...

Thanks again for the quick replys. No thanks vfrderek just wanted to know its purpose, cheers anyway though.

No probs......

Also, does anyone know where i can get hold of new dust seals for the linkage, i need 6 alltogether, i think!

You can either go to Honda or a any bearing supplier and ask for oil/dust seal size:
17x27x5

Or Honda part number 91262-MG7-005 £2.50 each from
http://www.davidsilverspares.co.uk/part ... 262MG7005/