Front Sprocket size 13
Posted: Thu Jul 14, 2011 2:29 am
Can you run a 13 size sprocket on the front of the NC30?
http://www.400greybike.com/forum/
What size rear did you run it with? I am thinking you would want a couple teeth more on the back otherwise perhaps the chain will run too heavily on the rubbing strip. Don't know about 30's but that was a problem on my T595.Cammo wrote:Yeah I've run a 13 before, no issues at all.
Only potential issue is if you currently run standard gearing the chain might be too long and not enough adjustment to take the slack out. Maybe that's what the mechanic meant.
Can't remember at all.![]()
And obviously it will throw your speedo out...
They may have been talking about it hitting on the horizontal cross member of the frame with the rear fully underloaded, ie hard on brakes.Guerrero wrote:Had you ran a 13 front sprocket before?
The local Japanese mechanics said the chain will hit something (can't understand Japanese)
Thanks
I'm in the military, station in NAF Atsugi.Neosophist wrote:What are you doing down in Zama?!
The 13t front will make it wheelie everywhere! :O
This might not be good for the road.. or track (it'll have no topend!)
The bike has a -1 +3 now and the tire is all the way forward, I should be fine with the smaller front.Cammo wrote:Yeah I've run a 13 before, no issues at all.
Only potential issue is if you currently run standard gearing the chain might be too long and not enough adjustment to take the slack out. Maybe that's what the mechanic meant.
Can't remember at all.![]()
And obviously it will throw your speedo out...