I am a bit of a tossa, I like a shift light.

To save me figuring out what makes the taco work etc. Has anyone fitted a DIY shift light to the NC30 ?

Cheers,

I've seen one of these used on an nc30. Aussie made, good bit of gear:

http://www.ecliptech.com.au/

From memory it reads revs from the coil, not the tacho. I think installation instructions are available on their website.

I have one of these:

http://www.xtracing.com/en/gpxpro/index.php

Which has a lot more than just shift lights! However, it may be worth the extra $$ stretch? The data logging side of things is pretty sweet and a GPS laptimer speaks for itself!

This runs off the coil as well. You can also calibrate rpm/speed per gear and get a gear indicator as well.

theres is a picture of a shift light on a vfr on this site, its same shift light as someone else posted, just thought you might wanna see what it looks like on a vfr http://www.fluke-motorsport.co.uk/shift ... -1040.html

I found this;

It expains what is needed to build a similar thing to the ones listed, not all the features, but similar thing?

http://foz11.tripod.com/DIY_MOD_s/Digit ... peedo.html

I think Rick Oliver sells shift lights.

Check out his stocklist in the V4 general section