hi all im new to posting but been reading on here for a while.

i was wondering if anyone could tell me whether the NC23 cbr RRJ or RRK, the triarm exhaust
would fit my CBR 400 RG Aero?

the bike came with a custom exhaust, stainless headers and aluminium link-pipe welded to the silencer.
this would be a really nice setup appart from the fact that the previous owner has removed all of the packing
from the exhaust so now it sounds like a formulae one car lol, its rather loud.
Now normally i would just cut, repack and re-weld it but ive never welded ally before, also i would like to just buy an exhaust that fits it, sounds nice and has a removable baffle.

any advice or known exhausts that fit would be muchly appreciated

thanks

mike

Not sure,

but there is a couple of original systems on ebay:

http://cgi.ebay.co.uk/Honda-CBR400R-Aer ... 19c618f8a3

http://cgi.ebay.co.uk/HONDA-CBR400-EXHA ... 19c604bc49

cheers for finding them

what you reckon the odds are that a tri-arm exhaust will fit the aero?
or do i just buy one and it fits

mike

I'm not sure but i would guess that it prob wouldnt fit without mods

if i have to go to the standard route, does anyone know what are the standard jets to fit the standdard exhaust ?#

mike

Show us a picture?

Maybe you could cut the can off an fit a universal slip-on?

this is the system on it at the moment

if anyone could tell me what this system is and who makes them then that would be muchly appreciated




















cheers

mike

amorti wrote:Maybe you could cut the can off an fit a universal slip-on?

the link pipe has a 45mm external diameter and i cant find a universal pipe of that size

Measure the outer diameter of the can. Compare to the carbon tube here:
http://www.pjengineering.co.uk/products.asp?cat=8&pg=2

See if you can't chop the can in half, repack, and reskin it in carbon?