Hey guys, i was wondering where i can get myself a set of NC35 Fairing Bolt's because i have lost a majority of my bolts.

Cheers,

Will.

Rick Oliver does a fairing kit. Check it out.

I bought a pro bolt kit from eBay

Thank you, what about the fairing clips? where the bolt tightens into, unfortunately i bought china fairings and they didn't supply the clips, where can i get some?


Thanks,

Will.

The pro bolt kit comes with the clips but not with the half or 3/4 screw bolts? Quick release bolts? Not sure what they r called
Look on eBay and it should show u what it comes with

Dzus fasteners are what you want.

thanks cammo, could you please link me to an eBay link or anything? I'm from Australia a swell and to be honest, RVFs are limited in parts & accessories...

Some on ebay in Oz:

http://cgi.ebay.com.au/Dzus-Zues-D-Ring ... 483c4d1f2c

http://cgi.ebay.com.au/Dzus-Zues-D-Ring ... 483c4d2560


Cheaper to source overseas:

http://cgi.ebay.com.au/Dzus-Quarter-Tur ... 4aa00318ca

http://cgi.ebay.com.au/DZUS-BLACK-Fairi ... 4158ff258e

http://cgi.ebay.com.au/GENUINE-Dzus-fai ... 20b7a66ee2


There are different sizes out there so best to buy the bolts with backing plates.

Thanks for the links Cammo, i'm going to buy some of theses bolts but one last question, there are some holes on the RVF wear theses screws wont fit.

2X subframe for the rear fairing to be screwed in.
2X Mid fairings (both sides)
2X lower cowl fairing (both sides)

Theses use normal bolts, i don't know what size/dimensions they are but it seems like thoses Dzus's won't fit so i was wondering if you knew what sizes or where i could buy some replacement bolts for it,

Thanks,

Will.