Need these so I can get a 29 wheel into my 23 asap, anyone got a spare set lying around I can swap for moneys?
Or even just the dimensions would be grand.
Cheers.

they are 10mm wide per side...you could copy the 23's dimentions for shape.
stimpy

Cheers Stimpy, if I've got time now I should be able to make my own.

I did wonder if I placed the 29 wheel in the swing arm and took some measurements I could make some from that, but the swing arm 'opens' fractionally as you slacken the spindle nut so I figured that wouldn't be any good.