http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

do any of you guys use these and whats your recomendations??



p.s. please dont hurt me , i know i belong in the CBR section

dude dont go near these extendable ones, i could see them snapping VERY easily. and or posibly pulling the thread out where the bolt goes on the extendible bit to the normal lever.

id stick with the normal short levers these are screaming out disaster.

thats IMO anyway

now piss off back to the IL4 section your not welcome here, single sided swing arm hater.

I have to confess i was looking at these.. i may wait until someone else fits and tries them out before i do..

they do look alright.. i would never extend them anyway so, just the first decent pair i came across, check my thread in the CBR general section asking teh same question, i posted a link to another pair which are nice

In the CBR section?? PPfffffff
I'll take a look now

I have seen a few people with those standard short levers and they all say they are good. I saw a set on a CBR last week and they looked nice enough..
I have been following that particular seller and his feedback for the levers appears good too (fitment and quality)

I was cheeky enough to ask him for a set of the extendables for £30 but he weren't having none of it.

hardnutdvd wrote:I have seen a few people with those standard short levers and they all say they are good. I saw a set on a CBR last week and they looked nice enough..
I have been following that particular seller and his feedback for the levers appears good too (fitment and quality)

I was cheeky enough to ask him for a set of the extendables for £30 but he weren't having none of it.

if you dont ask, you never know..

I bought some of these, they came in just over a week and I am very pleased with them, they fit perfect and feel and look great.

http://cgi.ebay.co.uk/RVF400-NC35-CBR25 ... 3719wt_689

domski1 wrote:I bought some of these, they came in just over a week and I am very pleased with them, they fit perfect and feel and look great.

http://cgi.ebay.co.uk/RVF400-NC35-CBR25 ... 3719wt_689

i have a set of those, just make sure you re adjust the nuts & bolts as the arnt fullt tightened when you get them and it leaves a little play in them, i tightened mine up and theyve been fine ever since.

porndoguk wrote:

domski1 wrote:I bought some of these, they came in just over a week and I am very pleased with them, they fit perfect and feel and look great.

http://cgi.ebay.co.uk/RVF400-NC35-CBR25 ... 3719wt_689

i have a set of those, just make sure you re adjust the nuts & bolts as the arnt fullt tightened when you get them and it leaves a little play in them, i tightened mine up and theyve been fine ever since.

Thanks for the heads up, will check them later!