Guys,

Maybe somebody know is CBR600F2 Shim kit fit to NC29

http://cgi.ebay.com/ebaymotors/HONDA-CB ... 0234328610

Or maybe somebody will recommend seller.

Thanks.

Guys, how did you balanced your valves.. nobody bought valve kit

Hi Parus,

I had a mate do mine at a bike shop. He bought the shims individually based on the sizes he needed. Not sure where he got them from though.

Yes it looks like they'll work, the 29 uses 7.48 mm shims as do the other bikes on this list (which ironically doesn't have the 29 on it)

http://www.procycle-online.com/hotcams/valve_shims.htm" onclick="window.open(this.href);return false;

cheers
danny

2 DiscoDan: Thank you mate

Guys,

Just like double check this exactly what I need

HOTCAMS SHIM KIT

Made for all quads and bikes under 400cc's

YZ250F, WR250F, CRF250R, CRF250X, RMZ250, ECT.

Includes three 7.48mm OD valve shims of each size from 1.20 to 3.50mm in .05 increments



http://cgi.ebay.com/ebaymotors/HOTCAMS- ... 0099072414

what happens if you need four of the same size Parus? Can you not go to a local bike shop and order them that way or try Graeme France. Its gonna work out a lot cheaper than the kit that you are looking at on ebay. Just a thought

Good question. Especially if I will need more than 4 same size.
Here is no local bike shop selling this stuff unfortunatelly.

The odds of needing four shims the same size are incredibly low - you'd be more likely to win the lottery

superlite wrote:The odds of needing four shims the same size are incredibly low - you'd be more likely to win the lottery

Bingo! If you're ever going to do more than one shim adjustment then the full kits pays for itself. I was aghast when I paid a shop to do my last one for me, they charged $70 for 6 exchange shims (I didn't even get to keep the old ones)

cheers, d