1987 nc 24 vfr 400
I was told Honda bros rear foot rest hangers fit nc24 ,
Is this any Honda bros or just a certain year ?

Is this rider or pillion pegs your on about as im keen to watch this topic if its rider pegs

I think you've been led up the garden path there.

The Bros foothangers are on metal plates...

The NC24 foot hangers are ML0 part numbers (which means they were made for the NC24)

You might be able to bodge something to fit but the right hand (exhaust) side foothanger is curved and incorporates an exhaust guard to stop the pillion putting their feet on the exhaust, this is nc24 high level exhaust specific.

Front foot pegs you can fit pretty much anything

Sorry to the OP if im stealing this thread a little,

Im not just after the pegs for the front, im after the hanger brackets also as my right one (brake pedal) has a break in it and it on the list of thing to do in the future so if there are alternatives that will fit, then that would be awesome.

There's loads of front pegs on eBay , I think this one with brake peddle and peg complete at the min , it was pillon I was after thanks 4 ur help neo

It passed an MOT with a broken hanger braket? eek

Theres one for each side on ebay if you search for NC24 peg.

I think I have a load of front ones knocking around. Im 95% sure I have at least one spare hanger bracket for the brake side if you need it, cheaper than those on ebay anyway :)

these just came up on the bay just incase you havent seen them

http://cgi.ebay.co.uk/Honda-VFR400-NC24 ... 35b1bfd8a6

http://cgi.ebay.co.uk/Honda-VFR400-NC24 ... 35b1bfd851

I just brought them , thanks mate your a star

yep! they are proper 24 ones too, wrong color but a start

no worries mate i know how hard it is to find parts for this bike at times always trawling ebay and came across them thought of you